BLUEPRINT MATCHED

Blueprint matched panels and components.
Specifying blueprint matched panels and components will achieve the maximum grain continuity since all panels, doors, and other veneered components will be manufactured to the exact sizes required and in exact veneer sequence. If possible, flitches should be selected that will yield sufficient veneer to complete a prescribed area or room. If more than one flitch is needed, flitch transition should be accomplished at the least noticeable predetermined location. Blueprint jobs have a longer lead time, due to the fact that all measurements must be verified in the field before the fabrication of the panel products. Although more expensive than other methods of matching within an area, blueprint matched panels and components produce the most impressive and aesthetically pleasing final veneer appearance.

This method of panel matching achieves maximum grain continuity since all panels, doors, and other veneered components are made to the exact sizes required and in the exact veneer sequence. If possible, flitches should be selected that will yield sufficient veneer to complete a prescribed area or room. If more than one flitch is needed, flitch transition should be accomplished at the least noticeable, predetermined location. This method requires careful site coordination and relatively long lead times. Panels cannot be manufactured until site conditions can be accurately measured and detailed. This panel matching method is more expensive and expresses veneering in its most impressive manner.


   < Sequence matched | Table of Contents | Plywood manufacturing >   


Copyright © 1999,2000 Veneernet.com
Unauthorized Use is Prohibited.